Clairol Nice 'n Easy Color Blend Foam Permanent Hair Color Medium Reddish Brown 5RB

This haircolor gives you dimensional color in a delightful, drip-free foam. Get beautiful tones and highlights for up to 8 weeks. The application is so easy, just shake it, foam it, love it. 100% gray coverage.

How To Use

Do the skin allergy test 48 hours before each application, even if you have already used coloring products.

Before Starting:

• Use a smock or an old towel to protect your clothing
• Have a clock handy for timing 
• Apply color to dry hair

Get Ready to Color:

1 Mix

• Put on the gloves. 
• Add bottle (1) to bottle (2). Replace the white cap. 
• Give the bottle 3 simple shakes, formula mixes easily.
• Let bottle settle for 30 seconds before squeezing. 
• No need to re-shake during use. 
• Replace the cap with the foamer top. 
• Foamer cap is not a pump.

Once mixed, never reseal or store the color in a closed container as it could burst.

2 Squeeze & Dispense

• Keep the bottle upright. Firmly squeeze center of the bottle. Do not hold horizontally while squeezing. 
• Squeeze foam to fill half the palm of your gloved hand. 
• If initial foam is runny, do not apply. Squeeze lightly 2-3 times until high quality foam is dispensed. 
• Distribute foam to both hands and apply to hair.

If foam or color get on your skin or household surface, wipe it off immediately with a damp towel.

3 Apply

• For all-over application, work the product into dry hair from root to tip using a shampoo-like motion. Keep applying
    until hair is completely wet. 
• For root-targeted application, apply to roots and grays first, then to the rest of your hair 
• Carefully re-touch your hairline and temples again for complete coverage. Wait 25 minutes.
  For resistant grays, leave on an additional 10 minutes. 
• Rinse until water runs clear. 
• Apply the conditioner.  Leave on for 2 minutes. Rinse out completely. Save second packet. Use 1 week later.

For best results use at least 75% of foam in bottle for short hair for long hair use entire bottle.

Frequently Asked Questions: About Clairol Products

How do I mix it?
For best results, less is more. Here are some tips: Once you pour the colorant, which is bottle 1, into the foamer bottle (bottle 2), put the cap on and give it 3 simple shakes to mix the contents. The formula mixes easily. No more shaking is necessary. The mixed formula remains a liquid in the bottle; the foam forms when you squeeze it into your hand.

If you over-shake or continue to shake during the application process, the bottle may fill with foam and cause the foam to be runny. If this happens, do not apply yet. See number 3 below.

How do I apply it?
After 3 simple shakes, allow the mixture to settle for 30 seconds. Then, squeeze the center of the bottle to start the foaming action. The mixed formula remains a liquid in the bottle; the foam forms when you squeeze it into your hands. Apply the foam to your head with your hands. Continue applying until your hair is completely wet.

If the foam is runny, do not apply; discard on a paper towel or tissue. You may have over-shaken the product. Allow the mixture to settle for 30 seconds, then squeeze the foamer bottle lightly 2-3 times until high-quality foam is dispensed. Keep the bottle upright while squeezing for the best quality foam and to prevent runniness.

It didn't foam up; it was a runny foam. What's wrong?
You may have over-shaken it. You only need 3 simple shakes to mix the product. This technology works with the unique foamer cap to transform the liquid in the bottle and create a drip-free foam in your hand when the bottle is squeezed. If the foam is runny, do not apply¿discard on a paper towel or tissue. Allow the mixture to settle for 30 seconds, then squeeze the foamer bottle 2-3 times until high quality foam is dispensed. Do not re-shake during use.

Holding the bottle horizontally while squeezing can also cause runny foam to be dispensed. Be sure to keep the bottle upright while using.

For future use, please remember:

• You only need 3 simple shakes to mix the product, using a gentle shake. You don't want a lot of foam to be created inside the bottle.
• The product should remain liquid in the bottle and you must squeeze the bottle to create foam in your hand.
• Always let the product settle for 30 seconds after mixing to ensure the foam in the correct consistency.

Do not re-shake during use.

Additional Instructions

Before you color - 48 Hours in Advance

• Take the Allergy Test.
• Do the Strand Test to determine your optimal coloring time. 
• Read the entire instructions before you begin.

Skin Allergy Test Instructions
Must be performed 48 hours before you color your hair

You will need a cotton ball or swab, a plastic bowl and a plastic spoon.

To open, unscrew the entire Color Blend Foam Activator developer bottle cap (#2). Then unscrew the Color Blend Foam Formula cap (#1).

Mix small equal parts of the Color Blend Foam Formula and Color Blend Foam Activator in a plastic bowl.

Tightly recap both bottles.

Apply mixture to a test area the size of a quarter in the bend of your elbow.  Allow to dry.  Use remaining mixture for the Strand Test.  Do not wash this area for 48 hours.  During washing, protect with an adhesive bandage and remove it immediately after washing.

Examine the test area during the next 48 hours. If no reaction occurs, you are ready to color.

The absence of a reaction to this test is no guarantee that an allergic reaction may not occur as a result of a future hair coloring process.  However, this test represents an important precaution.   Please consult a doctor if you have any doubts.

Note: if a rash, redness, burning or itching occurs, you may be allergic. Stop. You must not use this product.

Strand Test:

Do the Strand Test each time you color to determine optimal timing and color results. Perms, relaxers, previous color, and the sun can affect your results and timing. You will need: scissors, tape and a clock.

Cut a ¼ inch wide strand from the darkest or grayest part of your dry hair close to the scalp and tape at the cut end.

Completely cover the hair strand with the mixture remaining from the allergy test. Start timing.
After 15 minutes, check the strand. If the strand is not the color you want, return it to the mixture and check the color every few minutes for up to 25 minutes. For extra light blonding, more intense color results, or to cover resistant grays, it may be necessary to leave the hair color on for up to 45 minutes.
Fill in your personal color time below:
My timing for desired color: _______ minutes.

Color Hints & Tips:

• Do not apply to wet hair. Apply color to dry hair that is free of styling product build-up. If hair has build-up, shampoo one day prior to coloring.
• Do not shampoo immediately before coloring. Your scalp has natural oils that help to protect it during the coloring process.
• If any color gets on your skin or household surface, wipe it off immediately with a damp towel. 
• Use the additional ColorSeal™ Conditioning Gloss 1 week after coloring. 

  If the foam is runny, do not apply; discard on a paper towel or tissue. You may have over-shaken the product. Allow the mixture to settle for 30 seconds, then squeeze the foamer bottle lightly 2-3 times until high-quality foam is dispensed. Keep the bottle upright while squeezing for the best quality foam and to prevent runniness.
  
  It didn't foam up; it was a runny foam. What's wrong?
  You may have over-shaken it. You only need 3 simple shakes to mix the product. This technology works with the unique foamer cap to transform the liquid in the bottle and create a drip-free foam in your hand when the bottle is squeezed. If the foam is runny, do not apply¿discard on a paper towel or tissue. Allow the mixture to settle for 30 seconds, then squeeze the foamer bottle 2-3 times until high quality foam is dispensed. Do not re-shake during use.

  Holding the bottle horizontally while squeezing can also cause runny foam to be dispensed. Be sure to keep the bottle upright while using.

  For future use, please remember:

  • You only need 3 simple shakes to mix the product, using a gentle shake. You don't want a lot of foam to be created inside the bottle.
  • The product should remain liquid in the bottle and you must squeeze the bottle to create foam in your hand.
  • Always let the product settle for 30 seconds after mixing to ensure the foam in the correct consistency.

  Do not re-shake during use.
  
  Additional Instructions
  
  Before you color - 48 Hours in Advance

  • Take the Allergy Test.
  • Do the Strand Test to determine your optimal coloring time. 
  • Read the entire instructions before you begin.

  Skin Allergy Test Instructions
  Must be performed 48 hours before you color your hair

  You will need a cotton ball or swab, a plastic bowl and a plastic spoon.

  To open, unscrew the entire Color Blend Foam Activator developer bottle cap (#2). Then unscrew the Color Blend Foam Formula cap (#1).

  Mix small equal parts of the Color Blend Foam Formula and Color Blend Foam Activator in a plastic bowl.
  
  Tightly recap both bottles.

  Apply mixture to a test area the size of a quarter in the bend of your elbow.  Allow to dry.  Use remaining mixture for the Strand Test.  Do not wash this area for 48 hours.  During washing, protect with an adhesive bandage and remove it immediately after washing.
  
  Examine the test area during the next 48 hours. If no reaction occurs, you are ready to color.
  
  The absence of a reaction to this test is no guarantee that an allergic reaction may not occur as a result of a future hair coloring process.  However, this test represents an important precaution.   Please consult a doctor if you have any doubts.
  
  Note: if a rash, redness, burning or itching occurs, you may be allergic. Stop. You must not use this product.

  Strand Test:

  Do the Strand Test each time you color to determine optimal timing and color results. Perms, relaxers, previous color, and the sun can affect your results and timing. You will need: scissors, tape and a clock.
  
  Cut a ¼ inch wide strand from the darkest or grayest part of your dry hair close to the scalp and tape at the cut end.
  
  Completely cover the hair strand with the mixture remaining from the allergy test. Start timing.
  After 15 minutes, check the strand. If the strand is not the color you want, return it to the mixture and check the color every few minutes for up to 25 minutes. For extra light blonding, more intense color results, or to cover resistant grays, it may be necessary to leave the hair color on for up to 45 minutes.
  Fill in your personal color time below:
  My timing for desired color: _______ minutes.

  Color Hints & Tips:

  • Do not apply to wet hair. Apply color to dry hair that is free of styling product build-up. If hair has build-up, shampoo one day prior to coloring.
  • Do not shampoo immediately before coloring. Your scalp has natural oils that help to protect it during the coloring process.
  • If any color gets on your skin or household surface, wipe it off immediately with a damp towel. 
  • Use the additional ColorSeal™ Conditioning Gloss 1 week after coloring. 
  • Call the Expert Color Consultants at 1-800-CLAIROL if you are going more than two shades lighter or darker than your current color, going dramatically red or if you have bleached, double processed or highlighted hair. 
  • Wait at least 1 week after perming or relaxing before coloring.
  
  

  Distr. by Procter & Gamble