Command Strips Command Decorative Hook Metallic Coated

Damage-free hanging.

• General purpose
• Traditional
• Includes 1 hook, 2 strips
• Holds 2 kg/5 lb strongly
• Removes cleanly

Made in China and USA

To Mount:

1. Clean Surface with isopropyl rubbing alcohol, wipe lightly, let dry.  Do not use household cleaners.
2. Separate Strips.  Remove red liner.  Apply strip as shown.  Press Firmly.
3. Remove black liner.  Mount and press entire hook firmly for 30 seconds.
4. Wait 1 hour.  Save instructions for future removal.

To Remove:

1. Slide hook cover up to reveal base and removal tab.
2. To prevent base from snapping your fingers, hold base as shown.  Do not press base against wall.  Grab tab.  Never pull the strip out at an angle.  Strip could break or damage the surface.
3. Slowly slide the tab straight down against the wall, stretching the strip at least 15 inches (38 cm) until base releases from the wall.

Hooks can be reused with Command™ Adhesive Large Strips.

Note:  Apply to surfaces above 50°F (10°C).  Adhesive could soften and lose adhesion above 105°F (40°C)

©3M Corporation