Digipower Home & Car Battery Charger with 4AA Re-Chargeable Batteries

Rapid Charger

Maximum Power 2700mAh Batteries

For "AA" and "AAA" NiMH Batteries

• 2-3 Hours Charging Time
• Automatic Safety Cut-off
• Over-Charge & Over-Heat Protection

Recommended for all electronic equipment using "AA/AAA" size batteries, including digital camera, MP3/MP4 players, hand held devices, electronic flash, portable CD and cassette players, toys, and more...

• Flip-up plug for use in North America
• 4 "AA" Nickel Metal Hydride Batteries
• LED Power indicator
• LED Charging indicator
• 12V Cigarette lighter adaptor

Short circuit portion.
Safety timer to prevent overcharge.

DPS-3000+  is a new AA/AAA NiMH charger, it can charge 2 pcs of AA/AAA (2700mAh/1000mAh) in 2.5 hours, or it can charge 4 pcs of AA in 3.5 hours. 

800-266-4026

Made in China

Please Note:  This item has been built to U.S. electronics specification and may need additional modifications or converters to be used in countries other than the U.S. and Canada.

Load batteries into charger and select button.  This charger is designed to charge 2 or 4 pcs of AA or AAA Ni-MH rechargeable batteries.  AA and AAA, batteries can not be charged at the same time.  Place 2 or 4 batteries size AAA/R03 or AA/R06 into the charger compartments, taking care to observe polarity (+/-) as indicated inside the charger.  To charge AAA batteries, flip down the contact brackets before inserting the batteries.  To change AA batteries, flip up the contact brackets before inserting the batteries.  Set cursor to the "2" or "4" position according to the number of batteries to be charged.  If charging only 2 batteries at a time, place the batteries in the left hand side compartments of the charger.  Plug in the charger.  There're two ways to plug  in the charger:  Connect the charger input plug with AC mains.  Connect the adapter DC output plug with the charger DC input socket, then connect the adapter AC input plug with AC mains.  Charging start and LED indication.  The red LED on charger is powered.  The green LED bright in constant indicate batteries are fully charged.  The green LED blink indicate batteries are charging.  The green LED off indicate default mode.  Note:  Under fully charged status, the charger is in trickle mode but the batteries are ready for use and could be taken out.  The charger will not supply charging will not supply charging current under defect mode, the defect mode is due to the cases:  The battery is alkaline or fully charged Ni-Cd battery.  Alkaline and rechargeable battery mixed;  No battery put inside charger, or the "2/4" optional button is not in correct position;  Battery connected with reverse-polarity.  Charge complete:  When the green LED bright in constant, it indicates the batteries are fully charged, the batteries could be taken out and ready for use.  Remove the charger from AC power socket or wall outlet, or remove the adapter DC output plug from charger.  Follow the process from step 1 if you want to start another charge.  Note:  Proposed working temperature for 20°C - 25°C.

©2010 Mizco International, Inc.