Digipower Travel Battery Charger with 4AA Re-Chargeable and Pre-Charged Batteries
Size/Count 1.0 ea
- Batteries are pre-charged & ready to use
- Retains charge for up to 11 months
- Features an auto safety shut off
LCD NiMH Battery ChargerBatteries Are Pre-Charged & Ready to Use
Endure Series 1 Batteries
- 1 Battery ~ 2 Technologies
- Endure Batteries Retain Charge for Up to 11 Months
- Use 1000 Times
- Auto Safety Shut Off
- Environmentally Friendly
- High Capacity
- Good For High Drain Applications
Ready to use
- Instant Use
- Long-Time Storage
- Good for Mid & Low Drain Application
Recommended for all electronic device using "AA" and "AAA" size batteries. Including Digital Cameras, Electronic Flash, Portable CD and Cassette Players, MP3 Players, Hand Held Games, Computers and More.
Endure Series 1 batteries retain up to 90% of their power for one year; so they can be stored in any electronic device for extended periods without fear of drain and loss of power. Endure series 1 are pre-charged and ready to use.
- 4 Endure Series Nickel Metal Hydride Batteries
- LCD Display
- AC Adaptor
Made in China
Please Note: This item has been built to U.S. electronics specification and may need additional modifications or converters to be used in countries other than the U.S. and Canada.
Load batteries into charger. This Charger is designed to charge 2 or 4 AA or AAA Ni-MH rechargeable batteries. If you want to charge 4 AA, or 2 AA and 2 AAA, put batteries into the charger compartments, taking care to observe polarity (+/-) as indicated inside the charger. If charging only 2 batteries at a time, place the batteries in the left or right side compartments of the charger. Plug in the charger. Connect the charger input plug with AC mains. Charging start and LCD indication. The LCD battery indicator rolls to indicate batteries are being charged. The LCD battery indicator remains constantly on to indicate batteries are fully charged. The LCD battery symbol flashes to indicate charge is in fault mode. No LCD light indicates the charge is in default mode. Note: The charge will not supply will not supply charging current under default mode. The default mode is due to the below cases: No battery put inside charger. Battery connected with reverse-polarity. The charger has an internal failure. Power off. End of charging. When the charge time is completed, the batteries could be taken out and are ready for use. Remove the charger from the AC mains. Note: Proposed working temperature for charger: 20°C-25°C
©2008 Mizco International, Inc.
Shipping Weight (in lbs): 0.75 Product in inches (LxWxH): 6.25x 9.0x 1.95
Item Code: 234379
Before charging, read usage instructions. This charger is designed for indoor use only. Do not expose to moisture or rain. Please do not recharge non-recharge non-rechargeable batteries. This charger is intended to charge AA/AAA metal-hydride (Ni-MH) batteries only. Attempting to charge any other types of batteries may cause personal injury and damage. This charger can charge 2 AA and 2 AAA at the same time. Do not mix Alkaline/Ni-MH, or different capacity batteries together to charge. Remove charger from AC main when not in use. Never use an extension cord or any attachment not recommended manufacturer. Otherwise, this may result in a risk of fire, electric shock or injury to persons. Do not operate charger if it has been subjected to shock or damage. Take it to a qualified service-man for repair. Not recommended for use by children. Do not disassemble the charger. Incorrect reassembly may result in a risk of electric shock or fire. Unplug the charger from outlet before attempting any maintenance or cleaning. This power unit is intended to be correctly positioned in a vertical of floor mount position. For connection to a supply not in the not the USA, use an attachment plug adapter of the proper configuration for the power outlet. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.