Elmer's Instant Krazy Glue

Priced per store

Overview:

Size/Count 0.07 oz.

Ship to you

Not available

In Stores

Quick view

Now bonds better on plastic, metal, wood, rubber, glass, ceramic
Stay fresh container
One drop applicator
Forms a strong, long-lasting bond on most surfaces
Krazy Glue is packaged in our exclusive leakproof (convenient for storage), airtight (keeps product fresh) care
Best for these surfaces
- Ceramic, rubber, wood, metal, plastic (PVC, ABS, FRP), glass
Made in Japan

Read instructions before using
1. Protect work area. Glue may damage fabrics and furniture finishes.
2. Remove glue tube from case. Hold upright and point away from eyes and body.
3. Insert pin in tip of tube. If glue clogs at tip, pierce again with pin. Always point away from eyes and body before removing pin.
4. Parts to be glued should be clean and dry. Parts must mate. Metals may have to be cleaned with a solvent or scraped. Dampen porous ceramics on one side and apply glue to dry side.
5. Gently squeeze a small drop of glue on one side of part. Apply one drop per square inch. Too much glue or spreading glue will make a poor bond or not bond.
6. Join the parts and press for 30 seconds. Allow to set for a few minutes.
7. Insert pin in tip of tube. Store upright in capped case.
Not for use on foam, rear view mirrors, polyethylene, Teflon or other fluorocarbons
Do not put bonded items in oven or on stove
Do not use to attach artificial nails
Store in cool, dark place

Quick view

Now bonds better on plastic, metal, wood, rubber, glass, ceramic
Stay fresh container
One drop applicator
Forms a strong, long-lasting bond on most surfaces
Krazy Glue is packaged in our exclusive leakproof (convenient for storage), airtight (keeps product fresh) care
Best for these surfaces
- Ceramic, rubber, wood, metal, plastic (PVC, ABS, FRP), glass
Made in Japan

Read instructions before using
1. Protect work area. Glue may damage fabrics and furniture finishes.
2. Remove glue tube from case. Hold upright and point away from eyes and body.
3. Insert pin in tip of tube. If glue clogs at tip, pierce again with pin. Always point away from eyes and body before removing pin.
4. Parts to be glued should be clean and dry. Parts must mate. Metals may have to be cleaned with a solvent or scraped. Dampen porous ceramics on one side and apply glue to dry side.
5. Gently squeeze a small drop of glue on one side of part. Apply one drop per square inch. Too much glue or spreading glue will make a poor bond or not bond.
6. Join the parts and press for 30 seconds. Allow to set for a few minutes.
7. Insert pin in tip of tube. Store upright in capped case.
Not for use on foam, rear view mirrors, polyethylene, Teflon or other fluorocarbons
Do not put bonded items in oven or on stove
Do not use to attach artificial nails
Store in cool, dark place

This product has no shipping restrictions.

Shipping Weight (in lbs): 0.03
Product in inches (LxWxH): 0.78x 1.72x 7.13

Eye and skin irritant
Bonds skin instantly
Contains ethyl cyanoacrylate
Avoid contact with skin and eyes
If eye or mouth contact occurs, hold eyelid or mouth open and rinse thoroughly but gently with water only for 15 minutes and get medical attention
Liquid glue will sting eye temporarily
Solidified glue may irritate eye like a grain of sand and should be treated by an eye doctor
If skin bonding occurs, soak in acetone-based nail polish remover or warm soapy water and carefully peel or roll skin apart (do not pull)
Contact through clothing may cause skin burn
If spilled on clothing, flush with cold water
Avoid prolonged breathing of vapors
Use with adequate ventilation
Keep out of reach of children

Reviews

Shop more Household