Elmer's Instant Krazy Glue

Priced per store

Overview:

Size/Count 0.07 oz.

Ship to you

Not available

In Stores

Quick view

Best for pottery, ceramics and other porous surfaces
No run formula
Glues up, down, and sideways
Fills gaps on less than perfectly-mated surfaces
Forms a strong, long-lasting bond
Best for these surfaces
- Ceramic, rubber, pottery, metal, wood, plastic (PVC, ABS, FRP), leather, vinyl
Made in Japan

Read instructions before using
1. Protect work area. Glue may damage fabrics and furniture finishes.
2. Screw cap onto tube. Cap automatically pierces tube.
3. Remove red cap from applicator before use. Gently squeeze tube applying one to four drops per square inch depending on porosity. Too much glue or spreading glue will make a poor bond or no bond.
4. Parts to be glued should be clean and dry. Parts must mate. Metals may have to be cleaned with a solvent or scraped. Dampen porous ceramics on one side and apply glue to dry side. Sand or plane wood surfaces flat. Remove paint, glue, etc. from surface to be bonded.
5. Join the parts and press for 30 seconds. Allow to set for a few minutes.
6. Replace red top over applicator tip.
Not for use on foam, rear view mirrors, polyethylene, Teflon or other fluorocarbons
Do not put bonded items in oven or on stove
Do not use to attach artificial nails
Store in cool, dark place

Quick view

Best for pottery, ceramics and other porous surfaces
No run formula
Glues up, down, and sideways
Fills gaps on less than perfectly-mated surfaces
Forms a strong, long-lasting bond
Best for these surfaces
- Ceramic, rubber, pottery, metal, wood, plastic (PVC, ABS, FRP), leather, vinyl
Made in Japan

Read instructions before using
1. Protect work area. Glue may damage fabrics and furniture finishes.
2. Screw cap onto tube. Cap automatically pierces tube.
3. Remove red cap from applicator before use. Gently squeeze tube applying one to four drops per square inch depending on porosity. Too much glue or spreading glue will make a poor bond or no bond.
4. Parts to be glued should be clean and dry. Parts must mate. Metals may have to be cleaned with a solvent or scraped. Dampen porous ceramics on one side and apply glue to dry side. Sand or plane wood surfaces flat. Remove paint, glue, etc. from surface to be bonded.
5. Join the parts and press for 30 seconds. Allow to set for a few minutes.
6. Replace red top over applicator tip.
Not for use on foam, rear view mirrors, polyethylene, Teflon or other fluorocarbons
Do not put bonded items in oven or on stove
Do not use to attach artificial nails
Store in cool, dark place

This product has no shipping restrictions.

Shipping Weight (in lbs): 0.01
Product in inches (LxWxH): 0.61x 1.69x 7.0

Eye and skin irritant
Bonds skin instantly
Contains ethyl cyanoacrylate
Avoid contact with skin and eyes
If eye or mouth contact occurs, hold eyelid or mouth open and rinse thoroughly but gently with water only for 15 minutes and get medical attention
Liquid glue will sting eye temporarily
Solidified glue may irritate eye like a grain of sand and should be treated by an eye doctor
If skin bonding occurs, soak in acetone-based nail polish remover or warm soapy water and carefully peel or roll skin apart (do not pull)
Contact through clothing may cause skin burn
If spilled on clothing, flush with cold water
Avoid prolonged breathing of vapors
Use with adequate ventilation
Keep out of reach of children

Reviews

Shop more Household