Shaves Wet or Dry
Rinses Clean with Water
- Nickel Free
- Hypo-Allergenic for Sensitive Skin
- Cleaning Brush Included
- Easy to Hold Ergonomic Design
- Floating Head Follows Facial Contours to Provide a Comfortable Shave
- Battery Operated for Ease of Use Anywhere
- Shaves Up to 90 Minutes*
- Single Blade
Operates on Two AA Alkaline Batteries (Not Included)
1-800-338-0552
Made in China
*When Use with Panasonic® Alkaline Batteries
Before operating this product, please read the enclosed Operating Instructions completely. Its recommended that you replace the outer foil at least every year and the inner blade at least every two years to maintain your shaver's cutting performance. Before use: This wet/dry shaver can be used for wet shaving with shaving lather or for dry shaving. You can use this watertight shaver in the shower and clean it in water. Cleaning the shaver: If you clean the shaver with water, do not use salt water or hot water. Do not soak the shaver in water for a long period of time. Wipe it with a cloth dampened with soapy water. Do not use thinner, benzine or alcohol. Storing the shaver: Do not leave this shaver within the reach of small children. Keep these operating instructions in a safe place. Cleaning: 1. Remove the protective cap. 2. Apply some hand soap to the outer foil. 3. Turn the shaver on and then pour some water over the outer foil. 4. Turn the shaver off after 10-20 seconds. 5. Remove the foil frame while pressing the foil frame release button and clean it with running water. 6. Wipe off any drops of water with a dry cloth. 7. Dry the foil frame and the shaver completely. Using the shaver: 1. Depress the switch lock button and slide the 0/1 switch upwards. 2. Hold the shaver as illustrated above and shave. Start out shaving by applying gentle pressure to your face. Stretch your skin with your free hand and move the shaver back and forth in the direction of your beard. You may gently increase the amount of pressure as your skin becomes accustomed to this shaver. Applying excessive pressure does not provide a closer shave. Replacing the outer foil and the inner blade. Replacing the outer foil: 1. Press the foil frame release button and lift the foil frame upwards as illustrated. 2. Gently push the outer foil in the way as illustrated. Then it will pop up from the foil frame. 3. The new outer foil should be slightly bent and pushed in until it is hooked in the foil frame. Replacing the inner blade: 1. Remove the inner blade as illustrated. Do not touch the edges (metal parts) of the inner blade to prevent injury to your hand. 2. Insert the inner blade until it clicks as illustrated. Note: Turn the shaver off before replacing the outer foil and the inner blade. Cleaning with the brush: 1. Clean the inner blade using the short brush by moving it in direction. Clean the outer foil, the shaver body and the trimmer using the long brush. Do not move the short brush in direction as it will damage the inner blade and affect its sharpness. Do not use the short brush to clean the outer foil. Replacing batteries: When the blade speed decreases, this indicates that the batteries should be replaced with new ones. 1. Bottom of the shaver, turn the battery cover release dial to "open" position then remove the battery cover. 2. Remove the old batteries. 3. Insert two new AA alkaline batteries. 4. Reattach the battery cover and turn the battery cover release dial to "close" position. Notes: Turn the shaver off before replacing batteries. Before replacing the batteries, wipe the shaver free of moisture to prevent the inside from getting wet. Do not use a new battery together with an old one. Do not use rechargeable batteries. Doing so may result in the leakage of battery and the malfunction. Please make sure that the old batteries are disposed of at an officially assigned location, if there is one in your country. If the shaver will not be used for a long time, please remove the batteries.
©Panasonic Electric Works Wanbao Co., Ltd.
; "50x50_a")