PUR Faucet Mount Replacement Water Filter - MineralClear

Previously Known as PUR™ Ultimate

• Blue 3 Stage Filter
• Filters up to 100 Gallons / 378 Liters (2 - 3 Months)

Stage 1:  Added Layer to Trap Sediment

Stage 2:  Contaminant Removal
The Activated Carbon Filter Removes 99.9% of Microbial Cysts, Cryptospordium & Giardia
In Addition Reduces Lead, Asbestos, Benzene, MTBE, & TTHMs

Stage 3:  Filtered Over Natural Minerals for a Crisp, Refreshing Taste

Leaves beneficial fluoride in the water.  This PUR filter reduces Heavy Metals (Lead and Mercury), Chlorine (taste and odor) and Benzene to provide clean, healthy, great tasting water.

References "Current Drinking Water Standards" US EPA

NSF International, a nationally recognized, not-for-profit agency for the certification of water filters, has tested and certified this product to reduce the following list of contaminants.  Products with the NSF mark are certified to pass a series of stringent independent tests.

System Tested and Certified by NSF International against NSF / ANSI Standard No. 53 in model numbers FM3400, FM3700, FM3800, FM4100, FM4400, FM7300, FM7400, FM7500, FM7600, FM9100, FM9300, FM9400, FM9500, FM9600, FM9700, FM9800, FM9900 for the reduction of:  2,4-d, 2,4,5-TP (Silvex), Alachlor, Asbestos, Atrazine, Benzene, Carbofuran, Carbon Tetrachloride, Chlordane, Cysts, Endrin, Ethylbenzene, Heptachlor Epoxide, Lead, Lindane, Mercury, Methoxychlor, Monochlorobenzene, MTBE, o-Dichlorobenzene, Simazine, Styrene, Tetrachloroethene, Toluene, Trichloroethene, Total Trihalomethanes (TTHMs), Toxaphene, Turbidity and standard 42 for Chlorine taste and odor reduction, and Nominal Particulate Reduction Class 1.

1-800-PUR-LINE

Changing the Filter Cartridge:  Unscrew the cap of the faucet mount.  To assist in removing the cartridge, place the facet mount in the position shown (in diagram).  Run water slowly to remove filter.  Insert new cartridge with arrow pointing towards you.  The cartridge will fit snugly into filter housing.  Replace cap on the unit.  Run water through the filter cartridge for 5 minutes.  Before each use, run water for 5 seconds to activate filter media.  Removing a used cartridge automatically resets the Filter Life Indicator.  If your water contains high levels of sediment, the life of your filter can be reduced.

©Kaz