Resolve Pet High Traffic Foam Large Area Carpet Cleaner
NOTE: Actual product packaging may differ from image shown due to packaging updates & improvements made by manufacturer.
- Makes cleaning large areas of carpet and upholstery easier
- Eliminates pet odors, freshens with a light, clean scent, and discourages pet re-soiling
- Contains no CFCs or other ozone-depleting substances
- Leaves carpet plush
Easy to Use
Resolve Pet High Traffic Foam has a unique cleaning formula to help make cleaning large areas of carpet and upholstery easier.
Powerful Odor Stop Technology eliminates pet odors, freshens with a light, clean scent, and discourages pet re-soiling. The foam protects against dirt and pet stains while leaving carpet plush. It also makes cleaning easier, helping prevent future soils from setting deep into carpet fibers and upholstery fabrics.
Tough on Stains
Resolve Pet High Traffic Foam works great on tough stains, including urine, vomit, feces, and tracked-in dirt. Resolve aerosol cans contain no CFCs or other ozone-depleting substances. The formula contains no phosphates.
Hints from the Experts:
- This product is safe to use on most wool, nylon, and stain-resistant carpet.
- Contents will clean a carpeted area of 168 square feet (12 by 14 feet).
- To avoid rings, clean the entire section where soil occurs.
- Use vacuum cleaner with a fresh, empty bag.
- If accidentally sprayed on wood furniture, just wipe off.
- Not recommended for velvet, silk, vinyl, or leather.
Directions: Before cleaning, vacuum carpet thoroughly to remove loose dirt. Test a hidden section of carpet for colorfastness. If color is affected, do not use. For Use in Resolve Easy Clean Carpet Brush: Remove spray cap from Resolve Pet High Traffic Foam 22-ounce can. Shake the can before each use. If the can is already in the Easy Clean Carpet Brush, remove and shake again. Insert can into the brush and rotate clockwise until it gently clicks into the locked position. To remove the can, rotate counter-clockwise into the carpet. When dry, vacuum thoroughly to remove dried foam and loosened dirt. Pull trigger to dispense foam, then brush the foam into the carpet. Replace spray cap for standard use. Large Area Carpet Cleaning: Shake can well. Hold can upside down about 2 feet above carpet. Spray foam evenly over a 3-square-foot area. Work the foam into carpet in two directions using a damp, colorfast mop.Repeat steps one and three until the area is cleaned. When dry, vacuum thoroughly to remove dried foam and loosened dirt. Upholstery Cleaning: For upholstery, look for fabric manufacturer's cleanability code tag. Use on fabrics coded "WS" or "W." Do not use if coded "X" or "S." Blot wet soils with a clean, absorbent cloth. Shake can well and generously apply directly to stain from a distance of 4 to 6 inches. Allow foam to absorb into stain for three minutes. Gently blot area with a clean, damp, colorfast sponge or cloth. Rub gently if required. Do not over-wet fabrics. Rinse sponge or cloth and repeat as necessary. Allow fabric to dry thoroughly before use.
©Reckitt Benkiser Inc
Shipping Weight (in lbs): 1.4 Product in inches (LxWxH): 2.75x 2.75x 9.95
Item Code: 236386
Keep out of reach of children.
Caution: Do not puncture or incinerate container. Do not expose to heat or store at temperatures above 120║F (49║C). Avoid freezing. Contains no phosphates.