The Brand America Trusts™

• Unique plunger design won't stick even after repeated uses.
• Unique Dosage-Korc™ design allows medication to be drawn directly from the bottle with no fuss or mess.
• Latex-free syringe
• Pharmacist recommended

Contains:

• One oral syringe
• Dosage-Korc™
• Cleaning brush

Made in China

1. Insert Dosage-Korc into medication bottle with a downward twisting motion until a tight seal is made between the bottle and the Dosage-Korc.
2. Pull out plunger: Draw plunger back to the desired level of medication marking on the barrel of the syringe. Note: If bottle is over 90% full, skip this step.
3. Insert syringe into Dosage-Korc: Open Dosage-Korc cover and insert tip of syringe firmly into opening with a twisting, downward motion.
4. Push plunger down completely, forcing air into the bottle. If plunger sticks, moisten tip with vegetable oil. Note: If bottle is over 90% full, skip this step.
5. Turn entire unit upside down with the syringe, Dosage-Korc and bottle attached
6. Withdraw medication into syringe by pulling out plunger. Withdraw slightly more medication into the syringe than doctor's directions indicate and then push plunger upward until the desired level of medication is contained in the syringe. Excess medication will be forced back into the bottle along with any air bubbles that may cause an inaccurate reading of the medication level.
7. Remove syringe from Dosage-Korc: Return the entire unit to the upright position and remove the syringe with a slow, upward twisting motion.
8. Administer medication: Place tip of syringe past the patient's (adult, child or geriatric) lips and teeth. Slowly press plunger down to dispense medication into patient's mouth. Your syringe has been calibrated to deliver an exact amount of medication once you push the plunger all the way down. You will note there is a small residual amount of medication within the tip which has not been calculated in the volume you are delivering. This amount is not part of your dosage.
9. Replace original bottle cap: Remove Dosage-Korc and replace original bottle cap. Failure to remove the Dosage-Korc may affect the stability of the medication.
10. Clean syringe: Wash syringe and Dosage-Korc with warm soapy water between uses and use a cleaning brush to remove any residue.