Clairol Nice 'n Easy with Color Blend Permanent Haircolor Natural Palest Blonde

Gives you ultimate natural-looking color by layering rich tones and contouring highlights in one simple step. Our exclusive Color Blend Technology gives you a pigment-rich base layered with contouring highlights. Additionally, the formula, with our exclusive Triple Shine Hydrience Conditioning Complex, delivers up to 33% more shine.* And we've included our exclusive ColorSeal conditioning gloss to help seal in beautiful, natural-looking color and add intense shine.

• 100% gray coverage
• Lasts up to 8 weeks

*Vs. untreated hair.

Contains:

• Color blend formula
• Color blend activator
• ColorSeal conditioning gloss

Made in Mexico

How To Use

Do Skin Allergy Test 48 Hours Before Each Application Even If You Have Already Used Coloring Products

Prepare Color

• Put on the Expert Colorist Gloves.
• Pull off and discard tear-tip from the Color-blend Activator applicator bottle (2), then unscrew the applicator bottle cap.
• Open Color-blend Formula bottle (1) and pour contents into applicator bottle (2).
• Replace applicator bottle cap.
• Place gloved finger over applicator tip, point away from face, and shake well until the color has totally blended and the mixture has thickened.
• Immediately apply the color to your hair.

Once mixed, never reseal or store the color in a closed container as it could burst.

All Over Color Application

Ideal for first time users or if you haven't colored for several months.

Step 1:  Apply Color

• Part your hair into small, even sections using the applicator tip.
• Apply color first to your roots and stubborn grays.
• Work through hair from root to tip to ensure full saturation, but don't rub into the scalp.
• Pour any unused color mixture down the drain as it will lose its effectiveness after an hour.
• If any color gets on your skin, wipe it off with a damp towel.

Step 2:  Time it

• Leave on for 25 minutes or the time indicated by your Strand Test.
• Tip: If your grays are really stubborn, it may be necessary to leave color on for up to 45 minutes.
• For Ultra Light Blonde shades, leave the color on for up to 45 minutes as well.
• Nice ’n Easy—Layers rich tones and contouring highlights in one simple step!

Step 3:  Rinse and Gloss

• Add a small amount of warm water and massage into a lather. Rinse until water runs clear.
• Apply the ColorSeal Conditioning Gloss to condition and lock in highlights and shine.
• For optimal color results, leave on for 2 minutes, then rinse thoroughly with warm water.
• Save remaining ColorSeal Conditioning Gloss and continue to use once a week (after shampooing) in place of your usual conditioner for a total of 6 weeks of optimal color, shine and softness.
• Tip:  For best results use a quarter-size amount for each application.
• Our exclusive ColorSeal Conditioning Gloss helps seal in beautiful, natural-looking color and adds intense shine!

Root Application

Ideal for users who color every 4-6 weeks to help keep hair natural-looking and ensure even color root to tip.

Step 1:  Apply Color

• Part your hair down the middle and apply the color mixture to your roots, use applicator tip to separate your hair into sections and continue applying the color to your roots only. Save the remainder of the color to use for the rest of your hair.

Step 2:  Time It

• Leave the color on your hair for 20 minutes or 5 minutes less than the time indicated by your Strand Test.
• Then gently work the remaining color through the rest of your hair, but avoid rubbing it into your scalp. Leave the color on your hair for an additional 5 minutes.

Step 3:  Rinse and Gloss
See instructions above.  Tip:  If your grays are really stubborn, it may be necessary to leave color on for up to 45 minutes.  For Ultra Light Blonde shades, leave the color on for up to 45 minutes as well.

Additional Instructions:

Before You Color:  48 Hours in Advance

• Take the Allergy Test.
• Do the Strand Test to determine your optimal coloring time.
• Read this entire instruction leaflet before you begin.

Important:  Safety Instructions
Hair colorants can cause allergic reactions which in rare instances can be sever.  Tattoos may increase your risk of allergy, to reduce your risk follow these instructions:

1.  Do Not Use This Product At All If:

• You have already experienced any reaction to coloring products.
• You have sensitive, irritated or damaged scalp.
• In these cases do not conduct the skin allergy test and consult a doctor before using any hair color product.

2.  Perform a skin allergy test 48 hours before each product use even if you have already used coloring products before

Skin Allergy Test Instructions

Must be performed 48 hours before you color your hair.

You will need a cotton ball or swab, a plastic bowl and a plastic spoon.

• To open, unscrew the entire Color-blend Activator applicator bottle cap (2).  (Don't tear off the tab.)  Then unscrew the Color-blend Formula cap (1).
• Mix small, equal parts of Color-blend Formula (1) and Color-blend Activator ( 2 ) in a plastic bowl.  (For Ultra Light Blonde #87, add 1 part of Color-blend Formula and 2 parts of Color-blend Activator.)
• Tightly recap both bottles.
• Apply mixture to a test area the size of a quarter in the bend of your elbow.  Allow to dry.  Use remaining mixture for the Strand Test.  Do not wash this area for 48 hours.  During washing, protect with an adhesive bandage and remove it immediately after washing.
• Examine the test area during the next 48 hours.  If no reaction occurs, you are ready to color.  The absence of reaction to this test is no guarantee that an allergic reaction may not occur as a result of a future hair coloring process.  However, this test represents an important precaution.  Please consult a doctor if you have any doubts.

Note:  If a rash, redness, burning or itching occurs you may be allergic.  Stop.  You must not use this product.

Strand Test:

Do the Strand Test each time you color to determine optimal timing and color results.  Perms, relaxers, previous color, and the sun can affect your results and timing.

You will need: scissors, tape and a clock.

• Cut a ¼ inch wide strand from the darkest or grayest part of your dry hair close to the scalp and tape at the cut end.  Dampen with water.
• Completely cover the hair strand with the mixture remaining from the Allergy Test.  Start timing.
• After 15 minutes, check the strand.  If the strand is not the color you want, return it to the mixture for up to 25 minutes.  For extra light blonding, more intense color results, or to cover resistant grays, it may be necessary to leave the hair color on for up to 45 minutes.

Fill in your personal color time below:

My timing for desired color: _______ minutes.

Color Hints & Tips

• Use Nice 'n Easy for ultimate natural-looking color with rich tones and contouring highlights in one simple step!
• Apply color to dry hair that is free of styling product build-up. If hair has build-up, shampoo one day prior to coloring. Do not shampoo immediately before coloring. Your scalp has natural oils that help to protect it during the coloring process.
• If any color gets on your skin or household surface, wipe it off immediately with a damp towel.
• Use the ColorSeal Conditioning Gloss only once a week. It has been designed to give you long-lasting benefits. For best results use a quarter-size amount per application.
• If your hair has been recently permed or relaxed, wait at least 7 days and 1 shampoo before coloring. Do the Strand Test since your timing may need to be reduced. If you plan to perm or relax your hair, wait at least 7 days and 1 shampoo after coloring.
• If you've used a gradual color restorer, henna, or metallic dyes, do not use this product until your hair has grown out and colored areas have been cut off.

©Procter & Gamble