Walgreens Oral Syringe 2 TSP

Unique plunger design won't stick; even after repeated uses. Unique bottle adapter design allows medication to be drawn directly from the bottle with no fuss or mess.

• Contains cleaning brush
• Latex-free

Made in China

1. Insert bottle adapter into medication bottle: Insert bottle adapter into medication bottle with a downward twisting motion until a tight seal is made between the bottle and the bottle adapter
2. Pull out plunger: Draw plunger back to the desired level of medication marking on the barrel of the syringe. Note: If the bottle is over 90% full, skip this step
3. Insert syringe into bottle adapter: Open bottle adapter cover and insert tip of syringe firmly into opening in the bottle adapter with a twisting, downward motion
4. Push plunger down: Push plunger down completely, forcing air into the bottle. If plunger sticks, moisten tip with vegetable oil. Note: If bottle is over 90% full, skip this step
5. Turn entire unit upside down: With the syringe, bottle adapter and bottle attached, turn the entire unit upside down
6. Withdraw medication: Withdraw medication into syringe by pulling out plunger. Withdraw slightly more medication into the syringe than doctor's directions indicate, and then push plunger upward until the desired level of medication is contained in the syringe. Excess medication will be forced back into the bottle along with any air bubbles that may cause an inaccurate reading of the medication level
7. Remove syringe from bottle adapter: Return the entire unit to the upright position and remove the syringe from the bottle adapter with a slow, upward twisting motion
8. Administer medication: Place tip of syringe past the patient's (child, adult or geriatric) lips and teeth. Slowly press plunger down to dispense medication into patient's mouth. Your syringe has been calibrated to deliver an exact amount of medication once you push the plunger all the way down. You will note there is a small residual amount of medication within the tip which has not been calculated in the volume you are delivering. This amount is not part of your dosage
9. Replace original bottle cap: Remove bottle adapter and replace with original bottle cap. Failure to remove the bottle adapter may affect the stability of the medication
10. Clean syringe: Wash syringe and bottle adapter with warm, soapy water between uses and use a cleaning brush to remove any residue