Lysol Complete Clean Power Toilet Bowl Cleaner

Thick formula adheres to stains for better cleaning.

• Kills 99.9% of viruses & bacteria**
• Coats the bowl above and below the waterline
• Destroys toilet bowl rings
• Disinfects the toilet bowl as it cleans
• Will not harm plumbing or septic systems
• Contains no phosphates

**Kills salmonella enterica, escherichia coli, rotavirus WA and hepatitis A virus.

Made in USA

• Hold bottle firmly with one hand on a flat surface 
• With other hand, squeeze sides of cap where symbols indicate and turn counterclockwise. Avoid squeezing bottle when opening
• To reseal, turn cap clockwise until tightly closed

1. Flush first and remove any excess dirt and grime before cleaning and disinfecting
2. Wet all surfaces of bowl interior, including sides of bowl and under the rim, with at least 4 oz. of liquid (squeeze bottle approximately 15 seconds)
3. Let soak for at least 10 minutes. Do not close toilet bowl lid
4. Brush entire bowl thoroughly with a bowl brush and flush
5. Rinse brush in fresh water after use

• Apply a generous amount of liquid directly onto the tough stains
• For severe rust stains, if possible, remove water from bowl before applying liquid
• Let soak for 15 minutes. Do not close toilet bowl lid
• Brush entire bowl thoroughly with a bowl brush and flush. Rinse brush in fresh water after use
• Repeat if necessary

• Store in original container out of reach of small children
• Keep securely closed in a cool, well-ventilated area
• Nonrefillable container. Do not reuse or refill container