A superior adhesive/sealant that permanently protects/repairs all types of footwear. Waterproof.
For use on: leather, rubber, vinyl, canvas.
Made in USARead directions and test small area before use. 1. Surface should be clean, dry and free of dirt. 2. Puncture seal in neck of tube using pointer cap. Product can be used between 50 and 90 degrees F/10 and 32 degrees C. 3. Apply directly to each surface to be protected, bonded or repaired. Allow to partially cure, approximately 2 minutes before mating surfaces. For waterproofing and protecting use thin coats to build a thick coating, allowing each layer to set 3-4 hours. 4. Allow repair to dry for 24 hours. Depending on materials and temperature, maximum strength may not be reached for 48 to 72 hours. 5. For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap. 6. Clean uncured adhesive with acetone or citrus-based solvents. Cured material may be removed by cutting or scraping. 7. Repairing and protecting skateshoes: shoegooskate.com. Note: May damage finished surfaces. Avoid such contact until completely dry. Not recommended for use on polystyrene, polyethylene, polypropylene, Styrofoam or paper products. Not recommended for any items that come into contact with food, drinking water or animals.. © 2014 Eclectic Products, Inc.
WARNING: This product contains a chemical known in the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov/.
Not eligible for Ship to Store at this timeSee Ship to Store FAQs
This product cannot be shipped to the following state(s):
Shipping Weight (in lbs): 0.1
Product in inches (LxWxH): 1.15x 3.62x 7.12
Item Code: 324907
*Many of these answers are provided by manufacturers or other customers. Walgreens does not review, verify, or endorse those answers, which represent the sole opinions of those parties.